Skip to content

Manhole Covers & Frames

Secured square and round covers and frames for 320mm and 450mm inspection chambers. Polypropylene, load tested to BS EN 124 A15 in 15kN and 35kN variants, with four locking screws and a slip-resistant tread.

See the products
Test load15–35 kN
  • Made in Britain
  • BS ISO 9001:2015
  • TÜV Rheinland Certified
Manhole Covers & Frames
Why Manhole Covers & Frames

Polydrain’s manhole covers and frames finish the inspection chamber at ground level. They’re moulded in recycled polypropylene, so a 450mm cover and frame weighs around 6kg rather than the 30kg-plus of a comparable ductile iron unit, and one person can carry, set and secure it without lifting gear.

The range covers both chamber sizes in square and round formats. All units are load tested to BS EN 124 A15, with 15kN and 35kN test loads available depending on the duty required.

Every cover is secured with four locking screws and supplied with four blanking plugs, giving a flat, tamper-resistant finish. The enhanced tread pattern keeps the surface slip-resistant when wet. The covers suit gardens, driveways, housing developments, sports and leisure facilities and public realm, and they pair directly with MaxiChamber to provide a complete access and inspection solution.

  • Lightweight polypropylene

    A fifth of the weight of ductile iron, so one person can install without lifting equipment.

  • 15kN and 35kN variants

    Choose the test load to suit the duty, with the 35kN unit giving extra margin where required.

  • Dual-secured

    Four locking screws plus blanking plugs for a flush, tamper-resistant finish.

  • Fits the Polydrain chamber system

    Sized for the 320 and 450 MaxiChamber risers.

The Manhole Covers & Frames range

Products

6 of 6 shown

Specify Manhole Covers & Frames

Talk to our technical team about sizing, load class, lead times and pricing for your scheme.

Request a quote