Skip to content

HydroCell 60

Modular geocellular crates for stormwater attenuation, storage and infiltration. Each crate stores 190 litres at a 95% void ratio, with a compressive strength of 620 kN/m² for deep, high-load installations.

See the products
Load class620 kN/m²
  • Made in Britain
  • BS ISO 9001:2015
  • TÜV Rheinland Certified
HydroCell 60
Why HydroCell 60

HydroCell 60 is a geocellular crate built for the installations lighter crates can’t take: deeper burial, heavier cover and trafficked surfaces across residential, industrial and civil engineering projects. Each crate is rated to 620 kN/m² — 62 tonnes per square metre — while giving up only 5% of its volume to structure, so a tank stores 190 litres for every crate laid.

Inlet and outlet are integrated into the crate at 110mm and 160mm, and flange adaptors from 110mm to 300mm take larger incoming pipework. Shear connectors lock crates together across the tank. Wrapped in an impermeable geomembrane the crates form a sealed attenuation or retention tank that holds water and releases it through the outlet; wrapped in a permeable non-woven geotextile they form a soakaway that lets water drain into the surrounding ground.

Every crate is moulded in recycled polypropylene, weighs 12kg and is fully recyclable at end of life. Pair it with a catchpit or a silt trap on the inlet to keep sediment out of the tank, and with MaxiChamber for inspection access.

  • 620 kN/m² compressive strength

    62 tonnes per square metre, for deeper tanks and trafficked cover.

  • 95% void ratio

    190 litres of storage per crate, so fewer crates for the same design volume.

  • Integrated inlet and outlet

    110mm and 160mm built in, with flange adaptors to 300mm and shear connectors for assembly.

  • Attenuate or infiltrate

    One crate serves attenuation, retention or soakaway duty depending on the wrap.

Cover and burial depth

Minimum cover levels

PedestrianTrafficked (cars)Trafficked (44 tonnes)
0.3–0.5m0.5m1.2m

Maximum burial depth

Without groundwater (below base of cells): normal caseWith groundwater 1m below ground level, units wrapped in geomembrane
Typical soil typeAngle of shear resistanceSoil weight (kN/m³)PedestrianTrafficked (cars) <3 tonnesTrafficked (HGVs) <44 tonnesPedestrianTrafficked (cars) <3 tonnesTrafficked (HGVs) <44 tonnes
Stiff over-consolidated clay, e.g. London Clay24°202.78m2.53m2.28m2.13m1.99m1.84m
Normally consolidated silty sandy clay, e.g. alluvium, made ground26°193.14m2.87m2.61m2.26m2.11m1.97m
Loose sand and gravel30°183.83m3.55m3.27m2.44m2.31m2.18m
Medium dense sand and gravel33°194.09m3.82m3.56m2.47m2.36m2.24m
Dense sand and gravel38°204.78m4.53m4.28m2.57m2.47m2.38m
The HydroCell 60 range

Products

7 of 7 shown

HydroCell Shear Connector

HydroCell Shear Connector

HCSC

110mm EN1401-1 Flange Adaptor

110mm EN1401-1 Flange Adaptor

FA110

150mm EN1401-1 Flange Adaptor

150mm EN1401-1 Flange Adaptor

FA150

160mm EN1401-1 Flange Adaptor

160mm EN1401-1 Flange Adaptor

FA160

225mm EN1401-1 Flange Adaptor

225mm EN1401-1 Flange Adaptor

FA225

300mm EN1401-1 Flange Adaptor

300mm EN1401-1 Flange Adaptor

FA300

Case studies

Where HydroCell 60 has been used

View all case studies

Specify HydroCell 60

Talk to our technical team about sizing, load class, lead times and pricing for your scheme.

Request a quote