
UltraDrain
UltraDrain is an F900 polymer concrete channel drain with a 10mm ductile iron grating and a ductile iron edge. It's made for industrial yards, ports, docks, and airports, and resists the oils and chemicals that get left on those surfaces. It's also frost resistant to -50°C.
See the products
BS ISO 9001:2015
TÜV Rheinland Certified

Technical support0121 552 8887
UltraDrain is a polymer concrete channel drain load tested to BS EN 1433 class F900, so it's rated for particularly high wheel loads, aircraft included. It's CE marked, with certificates of conformity.
The 10mm ductile iron grating is tough rather than brittle, and resists cracking under repeated heavy wheel loads. Gratings get thicker as the channel widens, and every size carries the same F900 rating.
The polymer concrete body resists the oils and chemicals that get left on port, yard and airport surfaces, and resists frost down to -50°C. It's heat resistant to 100°C continuously and to 200°C for up to five minutes. A ductile iron edge protects the channel edges from wheel impact. Matching sump units, end caps and end cap outlets complete the run in every size.
Complete system
UltraDrain is a full system, not just a channel. Matching sump units, end caps and end cap outlets finish the run in every size.
10mm ductile iron grating
Ductile iron is tough rather than brittle, so the grating resists cracking under repeated heavy wheel loads, from aircraft to port machinery.
Chemical, frost and heat resistant
The polymer concrete body resists oils and chemicals, so it's at home in ports, docks, industrial yards and airports. It's also frost and heat resistant.
Ductile iron edge
A ductile iron edge armours the top of the channel, the part most exposed to wheels, protecting the polymer concrete from chipping and wear. Where ProDrain uses galvanised steel, UltraDrain steps up to ductile iron for F900 loads.
Specify UltraDrain
Talk to our technical team about sizing, load class, lead times and pricing for your scheme.


