
Catchpits
Catchpit chambers trap silt, leaves and grit before they can settle further down the system. 450mm diameter, 825mm deep with a 300mm sump, in three variants for 150mm twinwall, 160mm sewer and 225mm twinwall pipework.
See the products
Made in Britain
BS ISO 9001:2015
TÜV Rheinland Certified

Technical support0121 552 8887
Catchpit chambers sit wherever you need to take debris out of the flow — most often on the inlet to an attenuation, retention or infiltration tank, but equally ahead of a soakaway, a flow control or an outfall. Water drops into a 300mm sump where silt, grit and leaf litter fall out of suspension, and the cleaner flow carries on. It turns a buried maintenance problem into a chamber you can lift a lid on and empty.
All three variants share the same 450mm diameter and 825mm depth, so the only choice is the pipework connection: 150mm twinwall, 160mm or 225mm twinwall. They take the same MaxiChamber risers and can be paired with access covers from A15 to D400.
Our catchpit chambers are tested to BS EN 13598-1 and -2, conform to Building Regulations Part H, and match DCG 2020 Chamber Detail Types D and E, so they can be used in both adoptable and non-adoptable drainage to 3m depth. Talk to our technical team for installations deeper than 1.2m.
Need a different depth or sump? Deeper chambers are built up on site with MaxiChamber risers, and non-standard depths, sump sizes and inlet positions can be fabricated to order in our West Bromwich factory. Talk to our technical team about what your scheme needs.
300mm sump
Collects silt and debris below the outlet invert so tanks, soakaways and controls downstream stay clear.
Three pipework connections
150mm twinwall, sewer and 225mm twinwall on a 450mm chamber body.
Under 9kg, single-person install
Recycled polypropylene and bedded in granular backfill or concrete.
Adoptable and non-adoptable
Tested to BS EN 13598-1 and -2, DCG 2020 Chamber Detail Types D and E.
Specify Catchpits
Talk to our technical team about sizing, load class, lead times and pricing for your scheme.
